Metal Machinery for Automotive and Transport Parts manufacturing
From chassis brackets and body components to commercial vehicle frames and transport enclosures — Australian automotive and transport parts manufacturers rely on precision metal fabrication machinery to maintain quality, throughput and competitiveness. Power Machinery Australia supplies the full range.
Automotive and Transport Manufacturing Sectors Served
- Passenger Vehicle Parts – Brackets, chassis components, body stiffeneers, mounting plates and aftermarket accessories
- Trucks and Commercial Vehicles – Chassis sub frames, body panels, toolboxes, crossmembers ad cab structural components
- Bus and Coach Body Building – Structural frames, floor sections, roof bows, panel systems and access door components
- Transport and Trailer – Trailer decks, subframes, side walls, coupling mounts and tanker body fabrication
- EV and Hybrid Components – Battery enclosures, cooling system brackets, lightweight aluminium structural parts
- Performance and Aftermarket – Roll cages, suspension components, exhaust systems and custom fabricated accessories
- 4WD and Off-Road Accessories – Bull bars, winch mounts, lift kits, roof rack systems and underbody protection.
- Tooling and Fixtures – Production jigs, welding fixtures and assembly tooling for automotive manufacturing lines
Where our Machines Fit in the Fabrication Process
Automotive parts manufacturing involves a sequential series of cutting, forming and finishing operations. Power Machinery Australia supplies machines across every stage.
Sheet Blanking
Sheet steel & aluminium cut to blank size for forming operations
Bar and Section Cutting
Structural steel, tube and bar cut-to-length for chassis and structural components
Forming and Bending
Sheet and plate formed in to brackets, enclosures, panels and structural shapes.
Drilling and Hole Making
Bolt holes, clearance holes and tapped holes added to fabricated components
Assembly and Welding
Cut and formed parts brought together - clean, precise cut faces reduce weld prep time.
Machines for Automotive and Transport Manufacturing
Each machine category below covers the specific automotive and transport fabrication applications it serves, the models available, and why it matters to your production.
MEP Metal Bandsaws
Metal bandsaws are a cornerstone of automotive and transport parts manufacturing. Whether you’re cutting chassis tube for a truck body builder, solid bar stock for suspension components, RHS sections for trailer crossmembers, or aluminium extrusions for lightweight EV parts — a reliable, accurate bandsaw is essential to production flow.
The MEP Shark bandsaw series, manufactured in Italy to exacting standards, is one of the most widely used bandsaw ranges in Australian manufacturing. MEP bandsaws are engineered for continuous industrial use, with robust cast iron construction, precise blade guide systems and blade speed controls that handle everything from mild steel and stainless to hardened alloy bar and aluminium.
For automotive manufacturers, the key bandsaw selection criteria are: cutting capacity relative to the largest section you process, feed automation for production throughput, and mitre capability if you’re cutting angular joints for structural assemblies. The MEP range covers all of these requirements across five models suitable for different volume and capacity requirements.
Capacity: 280 x 200mm
Capacity: 280 x 220mm
Capacity: 280 x 220mm
Capacity: 330 x 260mm
Capacity: 510 x 320mm
Automotive and Transport Applications
- Chassis tube and RHS cutting for truck and trailer body building
- Solid bar stock for suspension arm blanks and pivot pins
- Structural steel section cutting for bus body frames
- Aluminium extrusion and bar cutting for lightweight vehicle components
- Exhaust pipe and tube cutting for aftermarket systems
- Stainless bar and tube for fuel system and hydraulic line components
- Roll cage tube and bar for performance and motorsport fabrication
- Jig and fixture steel cutting for production tooling departments
MEP Cold Saws
In automotive parts manufacturing, cut quality directly affects downstream assembly and welding operations. Cold saws use a circular toothed blade at low RPM with coolant lubrication to produce a burr-free, dimensionally precise, square cut face on solid bar, tube, RHS, channel and structural sections — eliminating the secondary deburring and facing operations that consume time on a production line.
For automotive manufacturers, this matters most when cutting parts that will be welded, threaded or pressed together. A clean, perpendicular cut face improves weld joint fitup, reduces porosity risk, and ensures dimensional accuracy in the finished assembly. Cold saws are also significantly quieter than abrasive cut-off wheels and produce minimal heat — protecting material properties, particularly in hardened and alloy steels used in suspension and drivetrain components.
The MEP cold saw range — including the Falcon and Tiger series in both manual and automatic configurations — covers bar and tube cutting from small precision components up to heavy structural sections used in commercial vehicle manufacturing.
Capacity: 130 x 80mm
Capacity: 180 x 95mm
Capacity: 180 x 95mm
Capacity: 180 x 95mm
Capacity: 180 x 95mm
Capacity: 180 x 100mm
Automotive and Transport Applications
- Suspension component bar stock cut to precise blank lengths
- Drivetrain shaft and axle blanks — requires burr-free, square face
- Exhaust system tube cutting for aftermarket fabricators
- Hydraulic cylinder barrel and rod stock
- Structural tube for roll cages and performance chassis
- Precision alloy bar for CNC machined automotive components
- Stainless tube for fuel, brake and hydraulic line components
- Aluminium section cutting for lightweight vehicle fabrication
Fintek VH Series Panbrake Folder
Panbrake folders produce complex box and tray-style components — parts with returns on multiple sides that cannot be made on a standard press brake. In automotive and transport manufacturing, this profile of component is ubiquitous: battery trays, wiring loom channels, toolbox bodies, step housings, service access panels and HVAC unit enclosures all require box and pan folding capability.
The Fintek VH Series is a robust manual panbrake available in multiple working widths, making it suitable for both small fabrication shops producing custom automotive components and larger manufacturers running consistent sheet metal forming operations. Its segmented upper beam fingers can be removed and repositioned to accommodate the specific depth and profile of each part being folded.
Manual operation gives skilled operators direct tactile feedback during the bend — important for consistent springback compensation when working with varying steel gauges and grades. The VH Series is a cost-effective, highly versatile machine for any automotive or transport fabrication workshop.
Bending Length: 1200-4000mm
Automotive and Transport Applications
- EV and hybrid battery tray enclosures and lids
- Wiring loom trays, conduit channels and cable management boxes
- Toolbox bodies for ute tray and commercial vehicle fitouts
- Step assemblies and running board housings for trucks and buses
- Bus and coach HVAC unit enclosures and mounting boxes
- Service access panels and door linings for commercial vehicles
- Radiator shroud and cooling system panel fabrication
- Protective cover panels for underbody components
Ermaksan Press Brakes
Bending Force: 1m x 40 tonnes
Bending Length: 1200-4000mm
Bending Length: 1200-4000mm
Automotive and Transport Applications
- Chassis mounting brackets and structural plate forming
- Battery enclosure trays for EV and hybrid vehicles
- Bus and truck body panel blanks formed to shape
- Trailer subframe gussets and crossmember plates
- Toolbox and accessory enclosures for commercial vehicles
- Door and body stiffeners for passenger and commercial vehicle manufacturing
- Suspension component plates and bearing housings
- Underbody protection forming for 4WD and off-road accessories
Ermaksan CNC HGS Guillotine
The Ermaksan CNC HGS is a hydraulic variable-rake angle shear — one of the most versatile and productive sheet metal cutting machines in the automotive and transport parts manufacturing sector. It forms the entry point to most fabrication workflows: raw sheet steel, aluminium or stainless arrives in coil or standard sheet form and the guillotine produces precisely dimensioned blanks ready for the press brake, panbrake, or welding bench.
What separates the CNC HGS from standard guillotines is the programmable CNC back-gauge and variable rake angle. The CNC back-gauge allows operators to program and store cut-length sequences for different parts — dramatically reducing setup time when switching between jobs and enabling the machine to run repeat cuts with tight dimensional consistency. Variable rake angle adjustment optimises cut quality for different sheet thicknesses: a lower rake angle for thin sheet produces a cleaner cut with less distortion; higher rake suits thicker plate.
Ermaksan is a globally recognised manufacturer of shearing and bending machinery, with a strong service network supporting Australian customers. The HGS is available in a range of cutting lengths and maximum material thicknesses to suit different production requirements.
Automotive and Transport Applications include:
- Sheet steel blanking for body panels and structural brackets
- Aluminium sheet cutting for lightweight EV and hybrid vehicle components
- Stainless sheet blanking for food-grade transport bodies and tanks
- Producing press brake pre-forms — precisely sized blanks for subsequent bending
- Trimming and squaring formed panels to final dimensions
- High-volume repeat cutting with CNC back-gauge memory programs
- Cutting reinforcement gussets and attachment plates for chassis assemblies
- Floor plate and checker plate cutting for truck and trailer decking
Ermaksan Fibre Laser
Fibre laser cutting has become the sheet blanking method of choice for automotive manufacturers who need the combination of precision, speed, and flexibility that guillotines and plasma cutting cannot match. A fibre laser cuts complex profiles, internal features, slots, and apertures from flat sheet in a single operation — with no tooling changes, no secondary deburring, and edge quality ready for forming or welding without further preparation.
Power Machinery supplies the Ermaksan Fibremak Momentum Gen-3, a high-performance flat-bed fibre laser cutting system capable of cutting mild steel, stainless steel, aluminium, brass, and copper with minimal kerf width and heat-affected zone. Fibre laser systems consume significantly less power than equivalent CO₂ laser technology and have fewer mechanical components, reducing both operating costs and maintenance downtime in a production environment.
For automotive and transport manufacturers, the practical benefit is the ability to cut complex bracket shapes, enclosure blanks, lightening patterns, and structural profiles directly from programmed DXF files — bypassing the multi-step blanking and profiling operations that would otherwise require separate machines and setups. Parts that go on to a press brake benefit from the laser’s consistent, clean edge quality, which improves bend angle accuracy and weld fitup in downstream operations.
2.5G Acceleration
Automotive and Transport Applications include:
- Complex chassis bracket profiles cut from flat plate
- Battery enclosure blanks with apertures and mounting features for EV components
- Lightweight structural profiles with cutouts for weight reduction
- Laser-cut body panel blanks for bus and commercial vehicle manufacturing
- Trailer and subframe gussets and connection plates
- Performance and aftermarket components with complex geometry
- Production jig and fixture plates with precision-located holes
- Aluminium sheet cutting for lightweight EV and hybrid structural parts
Strands Metal Drills
Hole-making is one of the highest-frequency operations in an automotive fabrication shop. Bolt holes in chassis brackets, clearance holes in mounting plates, threaded holes in structural assemblies, reamed holes in suspension components — every fabricated part that bolts to something else needs accurate, clean holes in the right location. A reliable industrial drill press is essential to that operation.
Power Machinery supplies the Swedish-made Strands drill press range — built to a standard that reflects the precision engineering tradition of Scandinavian industrial machinery. The Strands range covers 3MT and 4MT taper configurations across manual feed, automatic power feed, and mill-drill variants, giving automotive workshops the right machine for the work at hand.
All Strands machines feature machined and ground cast iron tables, geared head drive systems for reliable power transmission and operator safety, T-slot tables for clamping and fixturing, and accurate, positive-locking depth stops. An interlocked AS 4024-compliant safety guard is standard across the range.
25mm drill capacity
25mm drill capacity
25 & 30mm drill capacity
35 & 40mm drill capacity
Automotive and Transport Applications include:
- Bolt hole drilling in chassis brackets and mounting plates
- Clearance and tap-drill holes in structural frames and crossmembers
- Reamed holes in suspension components requiring tight tolerances
- Spot-drilling for subsequent CNC machining operations
- Drill and tap operations on bus body frames and structural sections
- Trailer hitch and coupling mount drilling
- Toolbox and accessory mounting hole production
- Jig and fixture plate drilling for production tooling departments
Typical Machines for Automotive and Transport Manufacturing
| COMPONENT/PART | TYPICAL MATERIAL | PRIMARY MACHINE | SECONDARY MACHINE | INDUSTRY SEGMENT |
|---|---|---|---|---|
| Chassis Mounting Bracket | Mild Steel | Ermaksan CNC HGS Guillotine | Ermaksan Press Brake | Passenger and commercial vehicles |
| Laser-Cut Chassis Bracket | Mild Steel/High Strength Steel | Ermaksan Fibremak Fibre Laser | Ermaksan Press Brake (form) | Passenger and commercial vehicles |
| Structural Chassis Tube Section | Steel RHS/CHS | MEP Shark Bandsaw (282 SXI or 331 Spider) | Strands Drill (Bolt Holes) | Truck, bus and trailer body building |
| Suspension Component Blank | Alloy Bar | MEP Cold Saw (burr-free precision cut) | Strands Drill (reaming) | Passenger vehicles and performance |
| Battery Enclosure Tray (EV) | Aluminium Sheet | Ermaksan CNC HGS guillotine (blank) | Fintek VH Panbrake (fold) | EV and hybrid manufacturing |
| EV Battery Enclosure Panel | Aluminium Sheet | Ermaksan Fibremak Fibre Laser | Ermaksan Press Brake (fold/form) | EV and hybrid manufacturing |
| Fuel Tank Cylinder | Steel Plate | Lemas Plate Roller (cylinder form) | MEP Bandsaw (plate blank cut) | Truck, bus and transport equipment |
| Body Panel Blank | Steel/Aluminium Sheet | Ermaksan CNC HGS Guillotine (blank) | Ermaksan Press Brake (form) | Bus body and commercial vehicle |
| Complex Profile Mounting Plate | Mild Sheet Steel | Ermaksan Fibremak Fibre Laser | Strands Drill (tapped holes) | Truck, bus and trailer body building |
| Toolbox Body (ute/truck) | Aluminium Sheet | Fintek VH Series Panbrake (box fold) | Ermaksan CNC HGS Guillotine (blank) | Commercial vehicle accessories |
| Exhaust Collector Tube | Stainelss/Mild Steel | MEP Cold Saw | Lemas Plate Roller (cone form) | Aftermarket and performance |
| Bull Bar/Underbody Protection | Steel Plate and Tube | MEP Shark Bandsaw (tube) + CNC HGS Guillotine (plate) | Ermaksan Press Brake (form) | 4WD and off-road accessories |
| Trailer Crossmember | Structural Steel | MEP Shark 512 SXI (heavy section) | Strands Drill (bolt holes) | Trailer & transport equipment |
| Bus Curved Roof Panel | Aluminium/Steel Sheet | Lemas Plate Roller (curve form) | Ermaksan CNC HGS Guillotine (blank) | Bus and coach bodybuilding |
| CNC Machined Component Blank | Bar/Billet | MEP Cold Saw (precision blank cut) | Strands Drill (centre/spot) | Precision automotive parts |
Why Automotive Manufacturers Choose Power Machinery
Supplying and supporting precision metal fabrication machinery across the Australian automotive and transport sector.
1. Proven Industry Brands
MEP, Ermaksan, Lemas, Strands and Fintek are trusted names in metal fabrication worldwide. Automotive manufacturers using these machines are investing in technology with a decades-long track record of production reliability — not experimental machinery from unknown origins.
2. Complete Workshop Coverage
From the first guillotine cut to the final drilled hole, we supply every machine category an automotive fabrication shop needs. One supplier relationship, consistent support, and the ability to package multiple machines for complete workshop fitouts.
3. CNC Capability for Production
Our CNC guillotine and press brake range from Ermaksan delivers the repeatability, program storage and fast changeover capability that volume automotive manufacturers need. Reduce setup time, reduce scrap and improve throughput — all on Australian-supported machinery.
4. Professional Installation
We don’t just deliver machines to your loading dock. Power Machinery Australia provides professional installation, levelling, commissioning and testing at your facility — ensuring machines are correctly set up for your specific production environment from day one.
5. Nationwide Delivery & Service
We supply and service automotive and transport manufacturers across all Australian states and territories — NSW, VIC, QLD, SA, WA, NT, TAS and ACT. Parts availability and technical support are a phone call away, not weeks away from an offshore supplier.
6. Capital Equipment Quotations
We understand that machinery procurement involves business cases, capital expenditure approval and finance considerations. We provide formal, itemised quotations suitable for management approval processes, and can work to your procurement timelines.
Automotive and transport Machinery FAQs
Automotive and transport parts manufacturers rely on metal bandsaws for cutting structural steel and tube, cold saws for precision burr-free cuts on bar and section, CNC press brakes for forming brackets and enclosures, CNC guillotines for high-volume sheet shearing, panbrake folders for box and pan components, plate rollers for curved structural parts, and pedestal drills for precision hole-making. Power Machinery Australia supplies all of these machine types.
For automotive manufacturing, the MEP Shark 282 SXI (semi-automatic) is ideal for mid-volume cutting of chassis tube, bar and structural sections. The MEP Shark 331 Spider (automatic NC) suits high-volume production cutting with programmable batch lengths. The MEP Shark 512 SXI handles larger cross-sections including heavy structural steel used in commercial vehicle and truck manufacturing. For prototyping and toolrooms, the MEP Shark 281 SXI and 282 CCS provide reliable manual operation.
Cold saws produce a burr-free, dimensionally precise, square cut face using a low-RPM circular blade with coolant lubrication — eliminating secondary deburring operations. In automotive manufacturing, parts for welding, threading or pressing together need a clean, consistent cut face to ensure weld joint fitup and dimensional accuracy. Cold saws also produce minimal heat, protecting material properties in hardened and alloy steels. Bandsaws and cold saws complement each other in a complete automotive fabrication shop.
CNC press brakes form a wide range of automotive and transport parts including chassis brackets and mounting plates, door and body stiffeners, underbody structural components, battery enclosures for EVs and hybrids, bus and truck body panels, trailer subframe components, toolbox lids, accessory mounting systems and HVAC duct brackets. The Ermaksan press brake range covers everything from compact precision parts on the Microbend to high-volume production on the Speedbend CNC.
The Ermaksan CNC HGS hydraulic guillotine is used for high-precision sheet metal shearing including blanking sheet steel for body panels and structural plates, cutting aluminium for lightweight automotive components, producing press brake pre-forms, and trimming finished parts. The CNC back-gauge and variable rake angle make it highly efficient for repeat-run production. Stored programs allow fast changeover between different part blanks on mixed production lines.
Yes. Power Machinery Australia supplies and delivers metal fabrication machinery to automotive and transport manufacturers nationwide — NSW, VIC, QLD, SA, WA, NT, TAS and the ACT. We provide professional installation, commissioning and operator training at your facility, along with ongoing Australian-based parts and technical support throughout the machine's service life.
Yes. We can supply a full workshop covering bandsaws, cold saws, guillotines, press brakes, plate rollers, panbrake folders and drills — with staged delivery, coordinated installation and full commissioning. We work with automotive manufacturers at the planning stage to recommend the right machine mix for their production volumes, materials and part types, and provide formal quotations suitable for capital expenditure approval processes.
Request an Aerospace Machinery Quote
Contact our team to discuss precision machinery for your aerospace or aviation MRO workshop. We provide full technical documentation suitable for aerospace quality management system requirements.